Contact

clientsite.uk

How to use the Glasswasher (in the lounge/bar area)?

  1. Prepare dishwasher
    1. Open door, and put water plug in base of washing area, under tray.
    2. Replace tray, close door, and push in left hand power button.
  2. Washer should now fill, and heat the water – heating light will glow.
    1. When water is hot the orange light by right hand button will go out.
    2. It is now ready to use.
  3. To wash glasses:
    1. Fill glass tray, and when ready,
    2. Close door, then
    3. Push-and-hold right hand button in for a second or two.
    4. Washing cycle will now start – and end after around 3 minutes.
  4. Glasses will now be hot, and clean.
    1. Either leave to air or dry with towel and replace on shelf
  5. At end of evening:
    1. Remove water plug, rest it in the tray, and close door.
    2. Water will now pump out automatically.
    3. Check inside that it is empty.
    4. Press power switch and see power light go out.
    5. Close door.
  6. Any problems, ask a Committee member near you!